Ready to replace a worn, scratched or noisy floor? Homeowners in Bayview Hill, Jefferson, Oak Ridges and Richvale can send us photos of the rooms. We’ll recommend a floor that suits how you live and prepare the base properly.
Quotes are free, with no payment needed.
Prefer to talk? Call (365) 360-7237 or text (365) 360-7237.
Take two or three photos, one up close and one from a few steps back. Text them to (365) 360-7237 with a quick note about what’s going on, and we’ll get back to you with next steps.
Richmond Hill's Gormley village core is a protected historic neighbourhood.
Read about City of Richmond Hill: Gormley villageSolid and engineered hardwood bring warmth to living and dining rooms. We let the boards acclimate, look over the subfloor and plan the layout before nailing. The result is a floor that feels solid and looks even across the room.
Kitchens, mudrooms and basements see spills, boots and pets. Vinyl plank shrugs those off and stays quiet underfoot over the right underlay. A flat base matters, because vinyl shows every bump below it.
Tile cracks when the floor beneath it flexes. We look for movement in the subfloor and add an uncoupling membrane where it helps. Our layout puts the cut tiles at the edges, not in the middle of the room.
An open main floor that runs from the kitchen into the living room needs one continuous layout. We plan where the rows start so the boards line up across the whole space. Doorways and thresholds then get their own transitions.
Pulling up an old floor can reveal glue, staples or a damaged subfloor. We remove the old material, clean the base and repair weak spots before the new floor goes down.
One photo per room, taken from the doorway, shows the layout and any steps. Close-ups of damage or squeaky spots help us spot subfloor problems. Add rough measurements and your preferred material, and we can price it.
Call or text (365) 360-7237. Photos help us see the problem.
Materials, removal, preparation and installation each get their own line. You’ll know the total before we order anything.
Richmond Hill lists cupboards, painting and decorating among work without a building permit, and we’ll flag any job that goes further.
City of Richmond Hill permit informationHardwood should rest in your home for a few days to adjust to its humidity. The exact time depends on the product and the season. We follow the manufacturer’s directions before installing.
Many vinyl planks resist water on the surface, which suits kitchens and basements. They can’t stop moisture rising through a damp slab, though. We look at the floor below before recommending one.
Yes, tile works well on a sound, dry concrete floor. Cracks in the slab may need a membrane so they don’t telegraph through. We look at the slab first and explain the options.
A thicker floor can make doors drag on the new surface. We trim the bottom of any door that needs it. Your quote includes that work so doors swing freely.
Yes, removing the old floor can be part of your quote. Carpet, laminate, tile and old vinyl each take different work. Once the old layer is up, we clean and check the subfloor.
An exact match is hard if the old floor has aged or is discontinued. A clean transition strip often looks better than a near match. We’ll show you the options at the doorway.
Call or text (365) 360-7237. Photos help us see the problem.
